Car mounted inflation pump with light, tire inflation pump, 12V portable inflation pump for vehicle use

[Product name]: Car air pump [Product model]: 5002 [Product size]: about 14.5*6*20.5cm [Product material]: ABS [Product weight]: Gross weight (about) 800g [Power supply] Line length]: about 300 cm Trachea length about 50 cm [Product packaging]: Kraft paper packaging size 220*158*88mm [Output power]: 120 (W) [Rated voltage]: DC12 (V) [Lighting lamp]: LED [Outside Box size]: 42.5×32.5×44.5(H)cm [Number of outer boxes]: 20pcs/ctn [Product features]: 1. This machine is suitable for 12V car tires, 2. It is also suitable for motorcycles, bicycles, balls classes, dinghies, beach floats, inflatable toys and more. 3. On the highway, in the field or at work in the morning, if the tire suddenly leaks or the tire is injected, it can be used as a first aid. 4. Car tires maintain the correct tire pressure, which can ensure driving safety and save gasoline. It can be used with the car, just in case, and has infinite uses. 5. Equipped with a set of inflation nozzles, which can be used to inflate tires, rubber boats, air cushions, inflatable toys, balls and other purposes. [Instructions for use]: 1. Insert the air nozzle on the rubber tube head directly into the tire valve. When you hear the sound of air leaking from the tire, it means that the air has been circulated. Continue to tighten the air nozzle. At this time, the air will no longer leak out. . 2. Insert it into the DC12V cigarette lighter. 3. When inflating, the pointer of the meter rises with the saturation of the tire. When the pointer reaches the proper tire pressure (generally, the tire pressure of a car tire is 223kpa=35PSI), take out the plug and the gas nozzle, and the work is completed. 4. Please use the professional ball needle and plastic nozzle equipped with this machine to connect with the air nozzle to inflate the ball and other air-requiring equipment. 【Precautions】: 1. Do not use it to inflate tires of large and overweight vehicles, such as trucks, large trucks, container trucks, etc.; The machine is limited to use DC (DC12V) power supply, and household high-voltage AC (AC220V) power supply is not allowed; 4. When inflating, please stop for 10 minutes after 10 minutes of continuous operation to cool down, so as to prevent damage to the air pump and accessories, and prolong the life of the motor. When the rubber boat is inflated, it can work continuously for 30 minutes; 5. When the general tire is inflated, it can reach the normal tire pressure of 30PSI in about 3-5 minutes, and the big tire will take a little longer; if the pointer of the instrument starts to inflate quickly If it rises to 50-100PSI, it means that the air is blocked and the air does not enter the tire. At this time, the air nozzle connector should be unplugged immediately and the operation should be repeated, otherwise the motor and instrument will be easily damaged. 6. Do not leave the body when using it, and pay attention to the tire pressure at any time, not to be too saturated; 7. After using the machine, the air nozzle wrench must be straightened to avoid fatigue of the rubber inside; 8. The air pump plug is equipped with a fuse. To start, please open the plug to check and replace it (the fuse is 10A);